Ford EcoBoost

Features

KW Dealer is excited to announce our newest lineup for the Ford Focus ST Ecoboost 2.0 MK3. The Focus ST ECOBOOST ECUTEK Tuning package and OTS tunes comes after months of development on the new ECUTEK platform for the Ford ECOBOOST Mustang and Focus

The package includes the license, ecutek connect bluetooth dongle and Stage 1 OTS map.

Custom tuning is available please contact us at info@kwdealer.com.au for more information.

Ford RaceROM Features

RaceROM Boost Controller

Adjust the maximum allowed boost pressure in each of the four modes by using ECU Connect or the cruise control buttons.

RaceROM Map Switching

Select the maximum allowed boost for each of the four modes. The rev counter provides a visual indication and the speakers provide an audible indication of the currently selected mode.

 

High-Speed Programming

Program the ECU in as little as two minutes with a visual rev counter indication of the progress.

ECU Backup and Recovery

Read the ECU before you program and rest assured you can recover the ECU should a problem occur during programming.

ECU Security

Protect your work from copying by others.

 

Adjustable Launch Control

RaceROM launch control on Focus ST models and live adjustment of the factory Launch Control on Focus RS models.

Flat-foot Shift

Set a target hold RPM during a gearshift based on clutch position while maintaining an open throttle to minimise boost drop during shifting.

Auto-blip

Synchronises RPM on a downshift by blipping the throttle in a controlled manner, resulting in smooth gearshifts under heavy braking without the need to heel and toe.

Oil Temperature Gauge Hijack

Repurpose the factory gauge to display a range of alternative values or even data from RaceROM custom maps.

Auto Start-stop On / Off Memory

Remembers the last setting after key-off so you don't need to enable or disable each time you get back in the car.

Custom Maps

Current version adds basic outputs and ECU Connect integration using custom inputs is also supported to allow live adjustments from your iOS or Android device using the EcuTek Bluetooth vehicle interface.

Custom logging parameters

Nearly 50 data logging parameters enable quality tuning of the complex Ford strategies and maps. Fast logging rates deliver up to 800 combined samples per second, meaning you can log 50 parameters simultaneously while maintaining logging rates of 16Hz (dependent on the combination of parameters selected).

Key parameters include:

• Boost control map inputs
  Key parameters used by the ECU's turbo shaft power control strategy enables tuners to make measured accurate changes to base maps.
• Boost Control PID
  Essential to tune the boost control's response characteristics on non standard turbos.
• Direct Injection
  Keep on top of injector flow and timing and be aware of airflow limits resulting from fuel flow safety measures.
• Ignition Timing
  Knowing what's limiting the ignition advance is key to being able to make careful changes to maps for more power or to know the tuning is knock limited.
• Knock Control
  Get feedback on instantaneous and learning corrections.
• Load Limits
  Track down the source and magnitude of troublesome load limits so they can be set appropriately instead of being removed, maintaining Ford's strategies to keep engines safe.

ECU Connect

ECU Connect fully supports Ford EcoBoost models offering DTCs for all ECU modules, high speed logging and performance analyser testing.

ECU Connect Features

As part of ongoing integration work with our Ford EcoBoost product the following RaceROM features can also also be controlled through ECU Connect.

• Mode Switching
  Switch between four different modes and set the name of each mode using ProECU. Custom Maps and RaceROM Features can be enabled on a per-mode basis.
• Boost Controller
  Select a different torque profile for each virtual boost setting, and limit the maximum setting on a per-mode basis.
• Launch Control
  Adjust the launch control RPM from ECU connect on cars without cruise control switchgear.
• Custom Inputs
  Custom inputs provides five new virtual inputs that can be controlled using your mobile device. Configurable as a slider, numerical value or on/off switch these inputs can be utilised by RaceROM Custom Maps to interact with the ECU directly from the driver's mobile device, adding a new dimension in driver control of the powertrain.

Boost Control Maps

Boost control maps are now better defined, making it easier to find the right maps required and faster to tune. There are further map improvements throughout the ECU's functions.

ECU Backup and Restore

Save the state of a non-standard ROM and revert back at a later date.