Hot
New
-7%

HALTECH ELITE 550 (ECU ONLY)

Reviews loading...

SKU: HT-150400

VENDOR: HALTECH

$750.00$699.00

You Save: $51.00 (7%)

Hurry up! Sales Ends In

Real time 21 visitor right now
Shopify Secure AES 256bit PayPal Visa MasterCard American Express McAfee Secure
PRODUCT INFORMATION
CUSTOMER REVIEWS
PRODUCT INFORMATION

DESCRIPTION

There has never been a better time to get a Haltech! The Elite 550 is a brand new addition to the Haltech Elite Series. Ideal for basic 4 to 8 cylinder or 1-2 rotor engine applications, this robust, competitively priced ECU features an environmentally sealed, waterproof case, 4 fuel and ignition channels and a 3 BAR internal MAP sensor. The Elite 550 ECU is powered by the Elite Software Programmer (ESP) - a powerful yet intuitive software that brings with it levels of functionality and ease of use never seen before in an engine control package..

The Elite 550 is ideal for basic 4 to 8 cylinder or 1‐2 rotor engine applications. This robust, competitively priced ECU features an environmentally sealed, waterproof case, 4 fuel and ignition channels and a 3 BAR internal MAP sensor.

The Elite 550 ECU is powered by the Elite Software Programmer (ESP) ‐ a powerful yet intuitive software that brings with it levels of functionality and ease of use never seen before in an engine control package.

Engine Suitability:

• 1 to 8 cylinder engines or 1 to 2 rotor engines
• Normally aspirated or forced induction

Features:

• Waterproof Case (IP67) (with USB Cover Fitted)
• 34 Position AMP connector
• 4 x Fuel Injection Outputs (Peak And Hold (0-8A Peak / 0-2A Hold)
• 4 x Ignition Outputs
• 2 x Engine Position Inputs with extensive trigger type support
• 1 x Digital Pulsed Input
• 5 x Digital Pulsed Outputs
• 2 x Analogue Voltage Inputs
• 1 x Throttle Position Input
• 1 x Coolant Temperature Input
• 1 x Air Temperature Input
• 1 x CAN Bus communication for Haltech CAN Expansion
• Internal 3Bar Map Sensor rated up to 200kPa of Boost (2bar/29psi)
• ESP Calibration Software – Intuitive and easy to use
• User definable tables
• Closed Loop O2 Control
• Sequential, semi sequential, batch or multipoint injection patterns
• Distributor ignition systems, multi-coil systems or Haltech Multiplex CDI systems
• Load sensing by:
– Throttle Position (TPS),
– Manifold Absolute Pressure (MAP) or
– Mass Air Flow (MAF)

Inputs and Outputs:
• 4 x Current controlled injector drivers, high or low impedance injector compatible
• 4 x Over current protected ignition drivers
• 5 x Over current protected low side pulsed outputs
• 2 x User definable analogue voltage inputs
• 1 x Digital Pulsed Input
• 3 x Function dedicated analogue voltage inputs:
– 1 x Coolant temperature
– 1 x Air temperature
– 1 x Throttle position sensor
• 2 x Engine position inputs with extensive trigger type support
• 1 x 3 BAR internal MAP sensor

Communications:
• 1 x CAN Bus communication for Haltech CAN expansion
• 1 x USB connection for programming

 

CUSTOMER REVIEWS
Someone purched a39 minutes ago from Kathrine, NT
Someone purched a40 minutes ago from Oak Estate, ACT
Someone purched a41 minutes ago from Ulladulla, NSW
Someone purched a42 minutes ago from Tullamore, NSW
Someone purched a43 minutes ago from Lawson,NSW
Someone purched a44 minutes ago from Parramatta, NSW
Someone purched a45 minutes ago from Toowoomba, QLD
Someone purched a47 minutes ago from Young, NSW
Someone purched a48 minutes ago from Ballarat, VIC
Someone purched a53 minutes ago from Oak Estate, ACT
Someone purched a54 minutes ago from Ulladulla, NSW
Someone purched a55 minutes ago from Tullamore, NSW
Someone purched a56 minutes ago from Lawson,NSW
Someone purched a57 minutes ago from Parramatta, NSW
HALTECH ELITE 550 (ECU ONLY)

HALTECH ELITE 550 (ECU ONLY)

$750.00$699.00
Reviews loading...