COBB TUNING FORD FOCUS RS MK3 ACCESSPORT V3 AUSTRALIA

Simple ECU flashing with gauge package! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge clusters), and mounting options (choose from 1,000s of standard vehicle mounts). And what's looks without brains? More processing power, memory, and storage to flash faster while saving all of your maps and logs. This is your new Accessport.

Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.

The Accessport is the world's best selling, most flexible, and easiest to use ECU upgrade solution for your Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Follow our staged upgrade path with pre-loaded Off The Shelf (OTS) maps or use custom mapping for any modification level. It's the last engine management solution you'll ever need.

Ford Specific Features:

COBB Adjustable Traction Control: Adjust target traction slip on the fly (Slots 1-8) and maximize tire grip to best suit given track conditions (wet/damp/dry/street/slip/burnout/etc). Note: Feature must be enabled in ECU calibration for use. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)

COBB Flat Foot Shift (MT Only): Improve shift times and keep boost built during shifts. Flat Foot Shifting can hold engine RPM at a set RPM between 3000-8000 RPM during shifting. This feature is enabled in COBB OTS maps. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)

COBB Launch Control: Adjust Launch Control on the fly with 6 pre-configured RPM slots to dial in launch based on track conditions and vehicle configuration. Enabled in OTS Maps and configurable within Accesstuner Pro. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)

COBB Change Map Slot: Map switching allows for instant changes to several tables inside the vehicles calibration without having to re-flash the ECU! Each "Map Slot" is grouped into a folder found inside the Map Switching Features group. When a map slot is selected by the driver, the ECU will use the corresponding values as defined in each folder. Further Documentation can be found here.

For specifics on these features please review the Ford User Manual located here.

*91 Oct = 95 RON | 93 Oct = 98 RON. Peak gains are measured as the difference between the highest points of the two plots. *Largest gains are measured as the largest gain at any single point between the two plots. Results may vary.

Generally speaking, 91 octane calibrations have a richer fuel curve, and a less aggressive ignition advance map to help compensate for lower octane fuel blends such as those found in Arizona, California, and Nevada; and/or less than ideal atmospheric conditions. The maps designed for 93 octane are the most aggressive. *91 and 93 octane results are compared against a 93 octane fuel baseline. Your 91 octane results may be higher than listed above; as a baseline of 91 octane fuel may read lower than our 93 octane baseline. 87 octane results compared against an 87 octane fuel baseline. Your 87 octane results may be higher than listed above if a blend of higher octane fuel is present.

CLICK HERE FOR MAP NOTES